Fuel Cock for 50cc-250cc dirt bike

Fuel Switch Valve Petcock for Honda Motorcycle • 16 x 1.5mm • 16mm
Product Description Nut threading 16 x 1.5mm(NOT 18MM)
22mm Hex Nut
5mm Ribbed Fuel Outlet
8mm Strainer Tube (or screen tube) Petcock assembly with filter screen and reserve gas tube o-ring seal to prevent leaking

On: Allow you to operate with normal fill-ups
Off: turn it to off position when done riding to prevent overflows
Reserve: allow you to access the lower portion of the gas tank when gas level is low

This is a brand new Fuel Petrol Tank Valve Cock Petcock

Fit Models: Honda:
NU50 Urban Express
MR175 - 1977
TRL200
XR200
XL250S - 1978-1981
CB350K Twin - 1968-1973
CL350K Scrambler - 1968-1973
XL350 - 1977-1978
CJ360T - 1975-1976
CB400A Hondamatic - 1978
CB400F Super Sport - 1977 (Does not fit 1975 - 1976 CB400F)
CB400T Hawk - 1978-1981
CB400T TI Hawk I - 1978-1979
CB400T TII Hawk II - 1978-1979
CM400A Hondamatic - 1979-1981
CM400C - 1979-1981
CM400E - 1980-1981
CM400T - 1978-1981
CB500K3 - 1976
CB500T - 1976
CX500 - 1978-1980
CB550F Super Sport - 1975-1977 (check your tank first, some 75-76 tanks use the 20mm petcock)
CB550K - 1975-1978 (check your tank first, some 75-76 tanks use the 20mm petcock)
CB750A Hondamatic - 1976-1978
CB750F Super Sport - 1977-1978 (Does not fit 1975 - 1976 CB750F F0)
CB750F Super Sport - 1979 (VIN# RC04-2000023 - RC04-2010669)
CB750F Super Sport - 1980 (VIN# RC04-2100003 - RC04-2116089)
CB750K - 1977-1978 (Does not fit 1975 K4 & 1976 K5)
CB900C Custom - 1980 (VIN# SC04-2000046 - SC04-2015593)
and many other scooters and motorcycles . .

Product Description
Nut threading 16 x 1.5mm(NOT 18MM，If you need the nut size opening 18mm then please check item https://www.ebay.com/itm/262733530956 )
Note: Please do not buy if yours looks different, it will not fit. if any question, pls feel free to contact us.