Best V54 FGTech Galletto 4 Master BDM-Tricore-OBD Function ECU Programmer With Multi Language

V2.13 FW V7.003 KTM100 KTAG ECU Programming Tool Master with Unlimited Token

Genius & Flash Point OBDII/BOOT Protocols Hand-Held ECU Programmer Touch MAP Get Free FGTech Galletto 2-Master V50 2016 New

The New Genius is the world’s first Touch & Map device which allows reading / programming the ECU in modern vehicles over OBD2.It is able to work without connection a computer during the critical phases of reading and writing of the ECU, ensuring the process is executed in complete safety.

ECU Decoder For Renault With Engine Immobilizer System

1.There is no problem if replacement ECU is bought from Renault service dealer -
2. it is sold with no immobilizer code stored, but replacing damaged computer with used one is impossible because of mismatch of unlocking codes.

DS17 Infineon Tricore Boot Reader Support EDC17 And Tricore

1.It is an updated version for BDM100, it takes direct access on processor and EPROM memory of the ECU over a dedicated port like the BDM system
2.Support: EDC17/MED17/ME17/MEV17/MEVD17/PCF2.1/SD13/SD14/SD16/SID208/SID807

Fiat ECU Scan V2.8 ECU Chip Tuning Tool

1.Hardware only bundle for Fiat ECU Scan software,compatible fully with fiateucscan.
2. there's no need to modify your interfaces.
3.A laptop or PC running Windows XP, Vista or Windows 7 with a USB port

1.The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable.
2.It's equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.

V2.13 FW V6.070 KTAG Master Version with Unlimited Token

MPPS V13.02 Chip Tuning French Customer Favorite

1.allows read and write memory from the car computer via the diagnostic connector.
2.Version: V13.02
3.Supports the latest drivers EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi